Here you will see some of the projects we are working on even before they happen. We will post pictures as they actually do happen from beginning to end. The reason behind this page is to show you the consumer and customer who we are and what we can do. We have no limits only imagination. If you dream it, we will build it.
Ed
We are going to start with a few drawings we are working on with different architects, builders and designers:
We will be linking to most of the pictures and subtitles as well.
Las Vegas condo project to be completed in summer of 2007
Penthouse Night Club in New York The fireplace is covered in glass with fire running up the walls.
Boise International Airport, Boise Idaho.
Roof top fire pit, Arizona.
7 fireplace burner designs for New York
One of our show banners. I'm sure the log companies really love us now!
Fire Pits and Fire Tables!
The waterfall and fire feature is now being retro fitted with fibre optics in all 14 water falls. We will post the pictures as soon as we are finished or have time to do so. This is a pond-less waterfall as you can see there is no POND! There are 2 48" fire pits in the middle of this feature.It is 26 feet wide, 16 feet tall and 18 feet from front to back. This is what you do to unusable hill sides!
Fire and water table in Las Vegas.
Fire table in San Diego
Pro-to type design of a fire table fire pit. As soon as it is completed we will post several pictures.There will be water as well!
This is a pro-to type fire table that when finished will be wrapped in wire and finished in smooth high heat concrete mix with a 48" fire bowl in the middle. There will be a 6" brushed metal finished edge to cover under table lights. The table is 60" wide and 24" tall. These will be delivered to Boise Idaho, Marriott Corp. We will post finished pictures as soon as we can.
If you have any great shots or ideas of what you have done with your logs, please send them to us as we know what to do with the pictures. POST THEM!
Here are a few pictures of our toppers before we process the glass We make all of our toppers and toppings in billet form as you can see they are 1" to 1 1/2" thick at first pour, yes we do pour the glass into molds. THE BILLETS/ GLASS BELOW ARE SOME OF OUR NEW COLORS COMING SOON! This is the first step of production and we should be posting these colors in about 2 to 3 months.
The tables below were made for the Marriott in Boise Idaho
Marriott Hotel Boise Idaho
This is a pro-to type fire table that when finished will be wrapped in wire and finished in smooth high heat concrete mix with a 48" fire bowl in the middle. There will be a 6" brushed metal finished edge to cover under table lights. The table is 60" wide and 24" tall. These will be delivered to Boise Idaho, Marriott Corp. We will post finished pictures as soon as we can.
A brushed finish 8" edge was added along with a touch sensor to turn the lights on under the table. It is a 3 position sensor (high, medium and low).
Now the high heat concrete is applied and shaped.
As it turns out there is a 36" triple ring under the lava rock and we are down sizing it to a 24" double ring. As you can see when the wind blows the fire get a little bit close to the edge.
If you had a drink near the edge it would be a little bit warmer now. The sides will be dropped about 3 inches and the center raised about 3" and a 24" ring will finish it off. We will post the pictures of the glass and ICE when it is installed in a few days.
Fire Rocks! Still under development, but here they are!
These will be made in hundreds of colors when we start production in the near future! They range from 2" to 6" in size and these look great in the fire!
Below are the Fire Rocks one at a time
This page will show you some of the projects and products we are working on from start to finish across the nation.
The first project we are working on is the Maryland Hotel Roof Top Fire Pit in downtown San Diego, California on the 7th floor roof top!
It measures 60" across, 30" tall and 144" long!
The fire table/ fire pit will and a 5' x 12' surface top in smooth concrete with a 16" x 120" stainless steel fire tray of to one side. We will post pictures as the project grows on.
Te fire pit is constructed with a new flexible track and about 3,000 screws, 240' of galvanized channel, 450 welds, 600 lbs of GFRC/ Wonder Board and coated in smooth texture concrete.
This was just before delivery, dry fit.
Once on the roof top the two halves were attached and the pan was installed
There were two burners and two controls installed
The glass is going in after the position of the fire table was adjusted. Pictures will be here soon!
If you look at the walls of the roof top you can see most of San Diego.
This is our latest venture and the first ones will be installed in a month or so. We will be posting pictures of the completed project. These are very futuristic Tiki Torches if that's what you would like to call them, enjoy.
This last one looks like Wilma Flintstone?
What we have done is create a vortex and added fire! These will be made available in all sizes, colors and shapes. Stay tuned for more installation pictures!
The Sticks below are a pro-to type of 2 sets that are being installed in Nipomo California in the Trilogy project by Shea Homes (Pismo Beach). We will follow up with completed pictures as soon as we have time to post the finished project. There are several fireplaces which will also be all electronic ignition as well
At the base of each burner there is a control valve to regulate the flow of fuel to the burner. The base will be covered with our black sand to conceal the valves. We will post pictures of the finished and completed project.
hese are our round ring burners with out the center hub and these can be made in any size in steel or stainless steel
The pan below is a brushed aluminum pan with sculpted legs. This pan is for propane and now we offer a simple adapter to convert this to remote control from the back side (battery operated). The glass installed is a multi mix for the photo shoot only. The pan is 2" with 3" legs. This pan will be installed in Cabo San Lucas, Mexico
Below, this is what a vent less burner looks like when you purchase one and we can do with it for you.
All of our sheet metal and welding is now done in house as we acquired a full sheet metal facility.
The vent less burner below is made of steel and there were actually 4 of these made. We covered the front and sides with 5" skirts. There are being installed in Georgia and as soon as they send pictures we will post them These pictures were taken just after the testing. This is a propane vent less burner and these are available in natural gas as well.
The pictures below are of the same burner as above with Azurlite installed. These 4 vent less burners are being installed in Georgia.
The skirts will hide the the valves and the remote control will be moved to the side of the fireplace. This was a vent less burner the customer sent to us for conversion and they asked for us to add a remote to all 4 vent less burners.
Here are some pictures of our newest fire and water tables. These were made in conjunction with TC Products. The fire feature won the HPBA Vesta Awards in Georgia this year 2008. Unfortunatly they fogot to mention our name? I'm sure they didn't mean to do this. The vortex fire is one of our newest creations this year.
This is a propane fueled Vortex Fire from our collection and design room.
What? The Vesta Awards were created by Hearth & Home magazine to recognize and honor companies for their innovation in product design and/or technology.
Where? Awards will be presented at an industry-wide ceremony on Friday, February 29, 2008.
The reception and awards program will take place from 5:00-6:30 pm. at the Georgia World Congress Center, Atlanta, GA.
The twin ribbon burners below are 50" long each and powered be an electronic ignition. The will be installed in Santa Barbara California.As soon as the installation is complete we will post the finished pictures of the burners. They will be installed one in front of the other to create two walls of fire.
These we mock up shots with very low pressure in the shop and when they get installed you will be able to see the potential of these burners.
The ignition system that was powering these burners is a 110 volt 415,000 btu system. The control of the flame height can only be done manually as electronic control is not available as of yet for this unit.
Below is one of the two Fire Sticks we built in Nopomo, California at the Shea Homes Trilogy project. Each fireplace had an electronic ignition located on the side of the fireplace in a cabinet inset into the side of the fireplace.
The fire pit below is in the Palace of Qatar and this was commissioned for the King of Qatar. The fire pit is a propane/ butane fueled fire pit and it was installed by Gasco of Qatar. They didn't understand the glass so they opted to use lava rock. Now they (the King) have ordered the glass and if we can get the pictures we will post them.
We did propane for the King and there are no issues! Awesome marble!
Below is one of our newest designs of fireplace pans. This one was designed by the customer for propane and they added remote control. This first pan will be made in Stainless Steel. We will finish this proto type in about 4 to 5 weeks and we will post pictures when we finish. These will be available in stainless steel, steel (painted or bare) or any other metal you desire.
Here are a few pictures of 5 of our Vortex Fires located in the Prive Las Vegas night club located at the Planet Hollywood Las Vegas. These pictures were taken just after construction but the gas was not connected at that time. We will go back later and take pictures of all 5 Vortex Fires burning at one time. The center Vortex is 48" tall, on either side they are 36" tall and the end Vortex Fires are 24" tall. The glass that was used was a clear crystal with only a bottom frame. The top was free floating. These are located just behind the main bar in the large picture window open to the balcony.
The pictures below are from the balcony looking in to the Prive which over looks the Las Vegas Strip.
This is our newest trailer! Here are a few pictures of the outside and tomorrow 03 17 09, we start on the interior! The trailer is 25' long, 8'6" wide and 13'6" tall! We will be displaying more than 500 colors and products in this new trailer. Enough with the minor details, here are the first pictures.
There will be more details and pictures to come in the next 3 weeks as this is how long it will take to complete this trailer. This is the next step for several dealers who are are waiting on the completition of this Mega Trailer!
The ribbon burner below is made from 1/8" brushed stainless steel. The center was water jet cut and then we bent the two center fins down to install the ribbon burner with electronic ignition. The base plate measured 94" x 26" and was installed in San Diego, California. The architect is Kelly Crain of San Diego.
Hopefully we will be sent the finished pictures of the fireplace.
We can build these in any size, shape, material and in natural gas or propane.
This was tested in the shop with a minimal of 1/4 lb of natural gas. This burner is capable of at least an 18" ribbon burn. If you look in the center you will see the ignition head for the electronic ignition.
Has anyone ever told you "Nice Logs" ? Nooo, I don't think so.
"Utility Patent Applications now Published as of June 2005 and May 2006"
We are still in Patent Pending
We take pride in our new product and take Patent Infringement very seriously! There are several companies who have copied our product and or process and they will be in for a surprise when our patent number becomes available to the public.
Please take note that in the United States reasonable royalties begin to accrue when a Patent publishes, (as ours has in June of 2005 and in May of 2006) depending on the state of the patent application at the time of issuance. Please take note that we do intend to enforce our patent rights to the furthest extent of the law upon issuance of our patent.
Patent publication available on request. Don't be fooled by look-a-likes or overly expensive imitations, ask for Aquatic Glassel by Moderustic. Be sure to get a price quote and you'll see the difference.
We are now designing a national catalog which should be 30 to 50 pages! We are asking for your help in acquiring pictures of fireplaces and fire pits for our catalog that our glass was used in. We would also appreciate your comments and or feed back as well. Please send your e mails and pictures to: Ed@Moderustic.com Jaunzemis@msn.com
Any questions please contact us at: Phone: 909 989 6129
Fax: 909 944 3811 E Mail: Ed@Moderustic.com
Stop by and visit our Showroom in Rancho Cucamonga: Moderustic Inc. 9467 Ninth Street #D Rancho Cucamonga, California 91730
CSLB# C-17 693887
We are 2 miles north of the Ontario Airport Hours: M-F 8:00 to 6:00 Every Saturday 10:00 to 2:00. After hours appointments available on request. If you're coming late, please call and we will wait. We usually stay until 6:00 pm.
We at Moderustic and Producers of Aquatic Glassel and the inventors of Fireplace Glass, are proud to offer the consumer over 500 products and we know we have spawned a few undesirable competitors in the market place but we continue on our quest for betterment and greater success through you the customer. We have been criticized for offering the crushed lava rock and or filler method by all of these other companies. But we understand the wants and needs of the customer, you. Spend less and get more. Some of these companies are telling the consumer to not use filler, why? They only want to fill their pockets with your money and we want you to save money. We know we have devastated these companies with our filler saving methods but it is with the best intentions for the consumer in mind. We have refused to sell to these individuals and companies because of their business practices. So please understand their intentions when they want you to purchase more glass. We take pride in our new product and take Patent Infringement very seriously! There are several companies who have copied our product and or process and they will be in for a surprise when our patent number becomes available to the public and they will find their business in ruin. If you are a previous or new customer and would like to add your comments on these companies or your experience, we will post a testimonial page for these to be read by the public. If you would like to post just your comments, they are welcome as well. Again, we work for the consumer and not the competition.
Moderustic Return Policy
Moderustic Inc Return Policy and Legal Notices • Returns must be made within 30 days of purchase with exceptions only by management. • Returned products must be unused and/ or unmixed. • Returned products must be packaged well to avoid damage in transit, OR YOU WILL BE RESPONSIBLE FOR THE DAMAGE. • Returned products that are damaged in transit will not be able to be refunded. • Refunds will be made towards product cost only. • Refunds will not be given for non-product labor costs (consulting fees, installation fees, labor, shipping etc.) • Restock fees may apply depending on which items are being returned. (10% to 70%) • Refunds are processed after customer’s review and acceptance of refunded amount. • Refunds take approximately 1 week for processing less any customer delays. • Any return must have a return authorization in writing by the management and this will be noted. • There are no returns or refunds on any custom metal products what so ever! • We are not responsible for local codes and or if any of our products are or are not approved. Please check with your local building department or governing agencies for proper approvals before purchasing. Custom built or designed items are not returnable for any reason. • Any Designs, Drawings, PDF Files, Ideas, Pictures, Attachments, Renderings, Facsimiles, Faxes, Blue Prints, Copies, Documents and even copy written materials once sent to Moderustic Inc, Ed Jaunzemis, Aquatic Glassel or any employee of Moderustic Inc becomes property of said company to use, distribute, copy, reproduce, manipulate, recreate, modify, advertise, promote, lay claim to and or use in our discretion as we need. If you do not agree with these terms then please do not send us anything. Our intentions are to create for you the "Customer" and it is our vast collection of material that will spawn an idea for you to have us create something for you. If we should create something/ anything for you that is one of a kind, you do not own any rights to this or there idea or ideas, product or concept in any way shape or form. • EXPEDITED SHIPPING NOTICE (i.e. 2/ 3-Day Select, Next Day/ 2nd Air, etc.): If UPS/ FedEx fails to deliver your packages within the expedited delivery time frame you have chosen, they can or will refund a PORTION of the delivery charges. We will pass 100% of the UPS/ FedEx refund back to you. The amount refunded is determined by UPS/ FedEx and will be less than the original expedited shipping charge that you originally paid. This is due to surcharges and fuel charges. We do not determine what will be credited back.
Moderustic Inc Ed Jaunzemis, President 9467 9th Street Suite D Rancho Cucamonga, California 91730 Phone 909 989-6129 Fax 909 944-3811
Pretty simple.
This is what it would look like on a bed of starfire.
Just click on the pictures to see more
Labor intensive!
Very nice if I do say so myself.
This last one looks like Wilma Flintstone?
Click HERE to see what we have been working on! Seen on HGTV and the DIY Network!
